NORD Drivesystems BU0200 User Manual
Page 72
3 Options
BU 0200 GB-4411
Subject to technical alterations
71
EtherCAT module*
SK TU4-ECT
Part No. 275281117 (IP55)
Part No. 275281167 (IP66)
This option enables connection of up to four
SK 2xxE via EtherCAT®.
Supported profiles: CoE
Baud rate: up to 100 MBaud
8x digital inputs
Low: 0-5V, High: 11-30V
2x digital outputs, 0/24V
System bus
CANopen module*
SK TU4-CAO
Part No. 275281101 (IP55)
Part No. 275281151 (IP66)
This option enables connection of up to four
SK 2xxE to the CANbus with the CANopen
protocol.
Protocol: DS301 / DS402
Baud rate: up to 1 MBit/s
4x digital inputs
Low: 0-5V, High: 11-30V
2x digital outputs, 0/24V
system bus
CANopen module with M12*
SK TU4-CAO-M12
Part No. 275281201 (IP55)
Part No. 275281251 (IP66)
This option enables connection of up to four
SK 2xxE to the CANbus with the CANopen
protocol.
As SK TU4-CAO, but with
6x M12 sockets
DeviceNet module*
SK TU4-DEV
Part No. 275281102 (IP55)
Part No. 275281152 (IP66)
This option enables connection of up to four SK
2xxE via DeviceNet.
Protocol: AC-Drive
Baud rate: 500 KBit/s
4x digital inputs
Low: 0-5V, High: 11-30V
2x digital outputs, 0/24V
system bus
DeviceNet module with M12*
SK TU4-DEV-M12
Part No. 275281202 (IP55)
Part No. 275281252 (IP66)
This option enables connection of up to four SK
2xxE via DeviceNet.
As SK TU4-DEV, but with
6x M12 sockets
I/O extension*
SK TU4-IOE
Part No. 275281106 (IP55)
Part No. 275281156 (IP66)
This option extends the SK 2xxE with additional
digital and analog inputs and outputs.
4x digital inputs
Low: 0-5V, High: 11-30V
2x analog inputs
0-10V, -10-10V, 0-20mA, 4-20mA
1x analog output
0-10V, -10-10V, 0-20mA, 4-20mA
2x digital outputs, 0/24V
system bus
I/O extension with M12*
SK TU4-IOE-M12
Part No. 275281206 (IP55)
Part No. 275281256 (IP66)
This option extends the SK 2xxE with additional
digital and analog inputs and outputs.
As SK TU4-IOE, but with
6x M12 sockets
Connection Unit TU4
SK TI4-TU-BUS
Part No. 275280000 (IP55)
Part No. 275280500 (IP66)
The connection unit is always required in order to
use an external technology unit. This implements
the connection of the TU4 to the SK 2xxE or the
wall-mounting kit.
36x 2.5mm
2
AWG 24-14
Spring-loaded terminals
TU4 Wall-mounting kit
SK TIE4-WMK-TU
Part No. 275274002
With the wall mounting kit, a technology unit can be
used/installed separately from the SK 2xxE.
*) In order to use the TU4 modules, a suitable
SK T14-TU-BUS Connection Unit must always be available.