NORD Drivesystems BU0200 - Manual (Page 254)

6 Parameterisation
BU 0200 GB-4411 Subject to technical alterations 253
Parameter No.
[Array]
Name
Superv
isor
Actual status and displayed values
INFORMATION (6.1.8), read only
P704 [- 01…-05] Voltage, last error 1...5 S
P705 [- 01…-05] VDC last error 1...5 S
P706 [- 01…-05] P-set, last error 1...5 S
P707 [- 01…-03]
Software version
Version / Revision / Special
P708 State of digital inputs (bin/hex)
P709 [- 01…-09] Analog input voltage [V]
P1/P2/AI1/AI2/SW/DI2/DI3/AI1 2nd/AI2 2nd
P710 [- 01…-02]
Analog output voltage [V]
first IOE / second IOE
P711 State of relays [hex]
P714 Operating time [h]
P715 Running time [h]
P716 Current frequency [Hz]
P717 Current speed [rpm]
P718 [- 01…-03]
Current setpoint frequency 1..3
[Hz]
P719 Actual current [A]
P720 Actual torque current [A]
P721 Actual field current [A]
P722 Current voltage [V]
P723 Voltage-d [V] S
P724 Voltage-q [V] S
P725 Current cos phi
P726 Apparent power [kVA]
P727 Mechanical power [kW]
P728 Input voltage [V]
P729 Torque [%]
P730 Field [%]
P731 Parameter set
P732 Phase U current [A] S
P733 Phase V current [A] S
P734 Phase W current [A] S
P735 Speed encoder [rpm] S
P736 D.c. link voltage [V]
P737 Usage rate brake resistor [%]
P738 [- 01…-02] Usage rate motor [%]
P739 [- 01…-03] Heat sink temperature [°C]
P740 [- 01…-13] Process data Bus In [hex] S
P741 [- 01…-10] Process data Bus Out [hex] S
P742 Database version S
P743 Inverter ID [kW]