NORD Drivesystems BU0200 - Manual (Page 238)

6 Parameterisation
BU 0200 GB-4411 Subject to technical alterations 237
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P750
Stat. overcurrent
(Overcurrent statistics)
S
0 ... 9999 Number of overcurrent messages during the operating period P714.
P751
Stat. Overvoltage
(Overvoltage statistics)
S
0 ... 9999 Number of overvoltage messages during the operating period P714.
P752
Stat. mains failure
(Mains failure statistics)
S
0 ... 9999 Number of mains faults during the operating period P714.
P753
Stat. overtemperature
(Overheating statistics)
S
0 ... 9999 Number of overtemperature faults during the operating period P714.
P754
Stat. parameter lost
(Parameter loss statistics)
S
0 ... 9999 Number of parameters lost during the operating period P714.
P755
Stat. system error
(System fault statistics)
S
0 ... 9999 Number of system faults during the operating period P714.
P756
Stat. Timeout
(Time out statistics)
S
0 ... 9999 Number of Time out errors during the operating period P714.
P757
Stat. Customer error
(Customer fault statistics)
S
0 ... 9999 Number of Customer Watchdog faults during the operating period P714.
P760
Actual current
(Actual mains current)
S
0.0 ... 50 ℃ Displays the actual input current.
P799 [-01]
...
[-05]
Op.-time last error
(Operating time, last fault 1...5)
0.00 ... ___ h This parameter shows the operating hours counter status (P714) at the moment of the previous
fault. Array [-01] ... [-05] corresponds to the last fault 1 ... 5.