NORD Drivesystems BU0200 - Manual (Page 140)

4 Display and control
BU 0200 GB-4411 Subject to technical alterations 139
Menu structure
The menu structure consists of various levels, which are each arranged in a ring structure. The OK key
moves the menu on to the next level. Pressing the SELECTION keys simultaneously moves the menu back
one level.
Parameter 1
management
P1201 2
Copy - Source
P1202 2
Copy - Target
P1204 2
Load default values
P1203 2
Copy - Start
P1205 2
Delete memory
P0 2
Back
Parameterisation 1
Display 1
P1001 2
Bus scan
P1002 2
FI selection
P1004 2
Values for display
P1003 2
Display mode
P1005 2
Standardisation factor
P0 2
Back
Options 1
P1301 2
Language
P1302 2
Operating mode
P1304 2
Contrast
P1303 2
Automatic bus scan
P1305 2
Set password
P1306 2
Box password
P0
zurück
205E 1.1kW / 400V
1
Fi/Hz U/V I/A
45.0 360 2.4
ONLINE FI P1 R RUNNING
U1 U2 U3 U4 U5
1 - - - -
OK - - - -
90
P1307 2
Reset box parameter
P0 2
Back
P0
zurück P1308 2
NORDAC p-box
Version 4.0 R1
Basic parameters 2
>OK< (to level 3 )
P0 2
Back
Frequency inverter
menu structure
 Section 6
Parameterisation
Motor data 2
>OK< (to level 3 )
Operating displays 2
>OK< (to level 3 )
P1101 2
Object selection
>Display< (P11xx), >Administer Parameters< (P12xx) and >Options< (P13xx) are purely ParameterBox-
parameters and do not have direct influence on frequency inverter parameters.
Via the menu >Parameterisation< the frequency inverter menu structure can be accessed, if necessary after
selection of the object, if frequency inverter data sets are already stored in the ParameterBox.
The description of the frequency inverter parameters is in Section 6 of this manual.