NORD Drivesystems BU0560 - Manual

BU0560_ERS_GB-0512 Subject to technical amendments 1
Supplements to Manual BU0500
NORDAC SK 5xxE- … -ERS
SK 5xxE-750-323-A … SK 5xxE-221-323-A
(0.75kW, 1.1kW, 2.2kW, 1/3~ 230V)
SK 5xxE-111-340-A … SK 5xxE-301-340-A
(1.1kW, 3.0kW, 3~ 400V)
BU0560_ERS_GB_0512
Getriebebau NORD GmbH & Co. KG
Documentation
Designation: BU0560_ERS_GB
Part No.: 607 56 02
Device series: SK 5xxE- … -ERS / Special device series
Version list
Designation of previous issues Software
Version Comments
Supplement BU0500-ERSA, May ‘06 See SK 500E Supplement BU0500-ERSA, first edition
Further revisions:
February 2008, December 2008, April 2010, June 2010
(For an overview of the amendments to the above editions: please refer to the June 2010 edition
(Part No.: 6075602/2410))
BU0560_ERS_EN, February 2012 See SK 5xxE X9 CAN/CANopen interface: plug-in type changed to
brand Phoenix, cable cross-section changed to 0.2 …
1.5mm²
Publisher
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Str. 1  D-22941 Bargteheide  http://www.nord.com/
Tel.: +49 (0) 45 32 / 401-0  Fax +49 (0) 45 32 / 401-555
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation and the acceptance of
possible warranty claims. These operating instructions must be read before working with the device!
The BU0560 contains important information on servicing and must be kept near to the device.
The CANopen modules and the corresponding frequency inverters are devices for stationary installation
in control cabinets or decentralised structures. All data regarding technical data and permissible
conditions at the installation site must be complied with.
Commissioning (commencement of the intended use) is not permitted until it has been ensured that the
machine complies with the EMC Directive 2004/108/EEC and that the conformity of the end product
meets the Machinery Directive 2006/42/EEC (observe EN 60204).
 Getriebebau NORD GmbH & Co. KG, 2012