NORD Drivesystems BU0200 User Manual

Page 70

3 Options

BU 0200 GB-4411

Subject to technical alterations

Int. 24V mains unit 1~ 400V

SK CU4-24V-140-B

Part No. 275271109

Internal 24V mains unit for supply of the
SK 2x5E, with a mains voltage of
1~ 380-500V, -20/+10%.

500Ω burden resistor for
evaluation of 0/4-20mA

Electronic brake rectifier

SK CU4-MBR

Part. No. 275271010

This option enables the direct control of an
electromechanical holding brake by an SK 2x0E.

Supply:
24V=, ±20% and
200 … 275 V ~ or
380 … 500 V ~

Setpoint converter

SK CU4-REL

Part. No. 275271011

This option enables bipolar signals (±10VDC) to
be converted into

unipolar signals (0…10VDC). In

addition, two relays can be controlled by means
of digital signals.

Supply:
24V=, ±25%

2 x AIN

(±10VDC)

2 x AOUT

(0 … 10VDC)

2 x DIN, 2x relays (

≤ 30VDC)

For all modules except SK CU4-POT: screw terminals, 16x 2.5mm

, AWG 26-14

* As an alternative to SK CU4-POT the connection extensions SK TIE4-SWT (direction selection switch,
Part No.: 275274701) and SK TIE4-POT (potentiometer, Part No.: 275274701) are also available.