NORD Drivesystems BU0200 - Manual (Page 139)

SK 200E Manual for frequency inverters
138 Subject to technical alterations BU 0200 GB-4411
Functions of the ParameterBox
LCD
display
Graphic-capable, backlit LCD display for displaying operational values and parameters for the
connected frequency inverter and ParameterBox parameters.
The menu levels and the individual menu items can be scrolled through with the SELECTION keys.
The next higher level can be accessed by pressing the keys and at the same time.
The contents of individual parameters can be altered with the VALUES keys.
Press the and keys together to load the default values of the parameter selected.
When controlling the inverter using the keyboard, the frequency setpoint is set using the VALUE keys.
Here the ramp time is limited to 0.17s/Hz, even if small values are set in P102/P103.
OK
Press the OK key to change to the selected menu group or accept the changed menu items or
parameter values.
NOTE: If a parameter is to be exited, without a new value being stored, then one of the
SELECTION keys can be used for this purpose.
If the inverter is currently controlled from the keyboard (not control terminals), then the current actual
frequency can be stored under the Jog Frequency parameter P113 with the OK key and used as the
next initial setpoint frequency.
START key for switching on the frequency inverter.
NOTE:
These functions can
only be used of they
are
enabled in
parameter P509 or
P540.
STOP key for switching off the frequency inverter.
The direction of rotation of the motor changes when the DIRECTION key is
operated. Rotation direction left is indicated by a minus sign.
Attention! Take care when operating pumps, screw conveyors, fans, etc.
LEDs
DS
DE
The LED's indicate the actual status of the ParameterBox.
DS – Device State The ParameterBox is ready for operation.
DE – Device Error An error has occurred when processing data, or in the FI.
LCD display
205E 1.1kW / 400V 1
Fi/Hz U/V I/A
45.0 360 2.4
ONLINE FI P1 R RUNNING
Frequency inverter type
Connection to
frequency inverter
Frequency inverter status
Frequency inverter
power, voltage
Current operating values
Frequency, voltage,
current
Operating parameter set