NORD Drivesystems B1901 - Manual

- 1 -
Operating and assembly instructions spring-loaded brake FDW – ATEX
Version 04.06
Operating and assembly instructions
Spring-loaded brake FDW
Type of protection IP 65 - dust-protected design
Zone 22, category 3D, T 125°C (non-conducting dust)
Please carefully read and pay attention to these operating and assembly instructions.
Important information
Safety information and warnings:
Impending danger because of current!
Dangerous situation!
Important information on explosion protection!
Safety information and instructions:
Paying attention to and observing theses operating instructions is a prerequisite for a trouble-
free operation and the compliance with possible warranty claims.
For this reason, first study the operating instructions before connecting the brake.
In order to protect persons and property, strictly meet all the safety information and instructions
included in these operating instructions.
When being ignited through hot or sparking objects, explosive dust concentrations can cause
explosions which might result in serious or fatal injuries of persons as well as severe damage to
property.
It is an absolute prerequisite that the persons who are responsible for using brakes in
potentially explosive atmospheres have been trained in the correct use of those brakes.