NORD Drivesystems BU0200 - Manual (Page 58)

2 Assembly and installation
BU 0200 GB-4411 Subject to technical alterations 57
2.9.2 Plug connectors for control connection
Various M12 round plug connectors are available as flanged plugs or flanged sockets. The plug connectors
are intended for installation in the connection units (SK TI4-
…) from the frequency inverter (SK 2xxE-…) or
technology units (SK TU4- …) and can be orientated as required. The protection class (IP67) of the plug
connector only applies in the screwed state. The cover caps correspond to the colour version as does the
plastic body of the plug connector.
System components Description Data
System bus
SK TIE4-M12-SYSS
Part. No. 275274506
M12 flanged plug
to connect theincoming system bus cable
A-coded, 5-pin
PIN 1 n. c.
PIN 2 +24V (brown)
PIN 3 GND (blue)
PIN 4 Sys-H (black)
PIN 5 Sys-L (gray)
Plastic body in light blue
SK TIE4-M12-SYSM
Part. No. 275274505
M12 flanged plug
to connect theoutgoing system bus cable
A-coded, 5-pin
PIN 1 n. c.
PIN 2 +24V (brown)
PIN 3 GND (blue)
PIN 4 Sys-H (black)
PIN 5 Sys-L (gray)
Plastic body in light blue
External voltage supply
SK TIE4-M12-POW
Part. No. 275274507
M12 flanged plug
to connect a 24V- supply
A-coded, 4-pin
PIN 1 +24V (brown)
PIN 2 n. c.
PIN 3 GND (blue)
PIN 4 n. c.
PIN 5 n. c.
Plastic body in black
Sensors and actuators
SK TIE4-M12-INI
Part. No. 275274503
M12 flanged plug
to connect sensors and actuators
A-coded, 4-pin
PIN 1 +24V (brown)
PIN 2 DI or DO (white)
PIN 3 GND (blue)
PIN 4 DI or DO (black)
PIN 5 n. c.
Plastic body in black
Analog signal
SK TIE4-M12-ANA
Part. No. 275274508
M12 flanged plug
to connect analog signal encoders
A-coded, 5-pin
PIN 1 +24V (brown)
PIN 2 AIN+ (/AUOT) (white)
PIN 3 GND (blue)
PIN 4 AIN- (black)
PIN 5 10V - REF (red)
Plastic body in white
HTL encoder
SK TIE4-M12-HTL
Part. No. 275274512
M12 flanged plug
to connect an HTL encoder
B-coded, 5-pin
PIN 1 +24V (brown)
PIN 2 Track B (white)
PIN 3 GND (blue)
PIN 4 Track A (black)
PIN 5 n. c.
Plastic body in black