IAI America XSEL-KX User Manual
Page 316
300
Appendix
I/O Parameters
No.
Parameter name
Default value
(Reference)
Input range Unit
Remarks
128
Network attribute 9
0H
0H ~
FFFFFFFFH
Ethernet TCP/IP message communication
attribute
Bits 0 to 15: SEL server open timeout value
(sec)
(No timeout check when “0” is set)
129
Network attribute 10
0
0H ~
FFFFFFFFH
Ethernet operation requirement
Bits 0 to 3: Modbus/TCP (Remote I/O)
(0: Not in use
1: Use (Disable exception status)
(Main application version 0.25
or later)
2: Use (Enable exception status
(upper two digits of error
number)))
* Refer to the explanation of error
levels in the operation manual
and perform processing
appropriate for each error level.
Bits 4 to 7: TCP/IP message communication
(0: Not in use, 1: Use)
Bits 8 to 31: Reserved (Operation requirement)
130
Own MAC address (H)
0H
Reference
only (HEX)
Only the lower two bytes are valid.
131
Own MAC address (L)
0H
Reference
only (HEX)
132
Own IP address (H)
192
1 ~ 255
* Setting of “0” and “127” is prohibited.
133
Own IP address (MH)
168
0 ~ 255
134
Own IP address (ML)
0
0 ~ 255
135
Own IP address (L)
1
2 ~ 254
* Setting of “0” and “255” is prohibited.
136
Subnet mask (H)
255
0 ~ 255
137
Subnet mask (MH)
255
0 ~ 255
138
Subnet mask (ML)
255
0 ~ 255
139
Subnet mask (L)
0
0 ~ 255
140
Default gateway (H)
0
0 ~ 255
141
Default gateway (MH)
0
0 ~ 255
142
Default gateway (ML)
0
0 ~ 255
143
Default gateway (L)
0
0 ~ 255
144
IAI protocol B/TCP: Own
port number (MANU mode)
64511
1025 ~
65535
* Important note: Always set a unique number
for each own port number.
(Duplication of own port numbers is permitted
only in the IAI protocol B/TCP MANU/AUTO
modes.)
145
Channel 31 opened to user
(TCP/IP): Own port number
64512
1025 ~
65535
146
Channel 32 opened to user
(TCP/IP): Own port number
64513
1025 ~
65535
147
Channel 33 opened to user
(TCP/IP): Own port number
64514
1025 ~
65535
148
Channel 34 opened to user
(TCP/IP): Own port number
64515
1025 ~
65535
149
IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(H)
192
0 ~ 255
* Setting of “0” and “127” is prohibited.
150
IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(MH)
168
0 ~ 255