IAI America XSEL-KX - Manual (Page 313)

297
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
97 IAI-protocol minimum
response delay for SIO
channel 1 opened to user
0 0 ~ 999 msec Valid only with IAI protocol.
98 (Reservation of SIO
channel 1 opened to user)
0
0
99 (Reservation of SIO
channel 1 opened to user)
0
0
100 Attribute 1 of SIO channel
2 opened to user
(expanded)
28100010H 0H ~
FFFFFFFFH
Bits 28 to 31: Baud rate type (0: 9.6, 1: 19.2, 2: 38.4, 3:
57.6, 4: 76.8, 5: 115.2 kbps)
Bits 24 to 27: Data length (7 or 8)
Bits 20 to 23: Stop bit length (1 or 2)
Bits 16 to 19: Parity type (0: None, 1: Odd, 2: Even)
Bits 12 to 15: Communication mode (0: RS232C, 1:
RS422, 2: RS485) * Only “0” can be
selected for board channels other than
Nos. 1 and 2
Bits 8 to 11: Receive operation type (0: RS485 =
Forcibly enable receive immediately after
send, RS232C/RS422 = Forcibly enable
receive immediately before send
1: Do not forcibly enable receive at send)
Bits 4 to 7: Board channel assignment number (1: D-
sub upper, 2: D-sub lower, 3: Flat
connector upper, 4: Flat connector lower)
Bits 0 to 3: Expanded I/O slot assignment number
(Expanded I/O slots 1 to 3 from the slot
next to the standard IO (I/O1) slot. * “0”
means no slots are used)
101 (Reservation of SIO
channel 2 opened to user
(expanded))
0 0H ~
FFFFFFFFH
102 Attribute 1 of SIO channel
3 opened to user
(expanded)
28100020H 0H ~
FFFFFFFFH
(Same as with I/O parameter No. 100)
103 (Reservation of SIO
channel 3 opened to user
(expanded))
0 0H ~
FFFFFFFFH
104 Attribute 1 of SIO channel
4 opened to user
(expanded)
28100010H 0H ~
FFFFFFFFH
(Same as with I/O parameter No. 100)
105 (Reservation of SIO
channel 4 opened to user
(expanded))
0 0H ~
FFFFFFFFH
106 Attribute 1 of SIO channel
5 opened to user
(expanded)
28100020H 0H ~
FFFFFFFFH
(Same as with I/O parameter No. 100)
107 (Reservation of SIO
channel 5 opened to user
(expanded))
0 0H ~
FFFFFFFFH
108 Attribute 1 of SIO channel
6 opened to user
(expanded)
28100010H 0H ~
FFFFFFFFH
(Same as with I/O parameter No. 100)
109 (Reservation of SIO
channel 6 opened to user
(expanded))
0 0H ~
FFFFFFFFH
110 Attribute 1 of SIO channel
7 opened to user
(expanded)
28100020H 0H ~
FFFFFFFFH
(Same as with I/O parameter No. 100)
111 (Reservation of SIO
channel 7 opened to user
(expanded))
0 0H ~
FFFFFFFFH