IAI America XSEL-KX - Manual (Page 314)

298
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
112 SIO system use
(SP8)
28100030H 0H ~ FFFFFFFFH (Same as with I/O parameter No. 100)
113 (SIO system
reserve (SP8))
0 0H ~ FFFFFFFFH
114 SIO system use
(SP9)
28100040H 0H ~ FFFFFFFFH (Same as with I/O parameter No. 100)
115 (SIO system
reserve (SP9))
0 0H ~ FFFFFFFFH
116~
119
(For extension) 0
120 Network attribute 1 1 0H ~ FFFFFFFFH Bits 0 to 3: CC-Link remote register area
H/L byte swap selection (0: Do not
swap, 1: Swap)
* The number of used ports and
number of occupied stations in
I/O parameter Nos. 14 and 15
must match.
(Main application version 0.25 or
later)
121 Network attribute 2 0 0H ~ FFFFFFFFH
122 Network attribute 3 0 0H ~ FFFFFFFFH
123 Network attribute 4 0H 0H ~ FFFFFFFFH Bits 0 to 3: Ethernet TCP/IP message
communication
IP address of connection destination
on server
Whether to permit 0.0.0.0 (IP address
of connection destination can be
ignored)
(0: Do not permit
1: Permit (not recommended))
* Note: Number of clients that can be
connected simultaneously to
one server port channel = 1