3Com Wireless LAN WX1200 - Manual (Page 630)

630 C HAPTER 24: B OOT P ROMPT C OMMANDS
See Also
„
change on page 623
„
create on page 624
„
delete on page 625
„
next on page 633
fver Displays the version of a system image file installed in a specific location
on a WX switch.
Syntax — fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
„
c: — Nonvolatile storage area containing boot partition 0 (primary).
„
d: — Nonvolatile storage area containing boot partition 1
(secondary).
„
e: — Primary partition of the flash card in the flash card slot.
„
f: — Secondary partition of the flash card in the flash card slot.
„
boot0: — Boot partition 0.
„
boot1: — Boot partition 1.
„
filename — System image filename.
DEVICE Location of the system image file:
„
c: — Nonvolatile storage area containing boot partition 0
„
d: — Nonvolatile storage area containing boot partition 1
„
e: — Primary partition of the flash card in the flash card slot
„
f: — Secondary partition of the flash card in the flash
card slot
„
boot0 — boot partition 0
„
boot1 — boot partition 1
FILENAME System image file name.
FLAGS Number representing the bit settings of boot flags to pass to
the booted system image.
OPTIONS String up to 128 bytes of boot options to pass to the booted
system image.
Table 112 Output of display command (continued)
Field Description