Set spantree portfast – 3Com Wireless LAN WX1200 User Manual
Page 415

set spantree portfast
415
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — This command applies only to the default VLAN (VLAN 1). To
change the cost of a port in another VLAN, use the set spantree
portvlancost command.
Examples — The following command changes the cost on ports 3 and 4
to 20:
WX1200# set spantree portcost 3,4 cost 20
success: change accepted.
See Also
clear spantree portcost on page 394
clear spantree portvlancost on page 395
display spantree portvlancost on page 403
set spantree portvlancost on page 417
set spantree
portfast
Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
Syntax —
set
spantree
portfast
port
port-list
{enable
|
disable}
port
port-list
— List of ports. MSS enables the feature on the
specified ports.
enable
— Enables port fast convergence.
disable
— Disables port fast convergence.
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.