3Com Wireless LAN WX1200 - Manual (Page 137)

display arp 137
History — Introduced in MSS Version 3.0.
Examples — To return the WX switch’s real-time clock to UTC, type the
following command:
WX4400# clear timezone
success: change accepted.
See Also
„
clear summertime on page 135
„
set summertime on page 191
„
set timedate on page 193
„
set timezone on page 194
„
display summertime on page 154
„
display timedate on page 155
„
display timezone on page 155
display arp Shows the ARP table.
Syntax — display arp [ip-addr]
„
ip-addr — IP address.
Defaults — If you do not specify an IP address, the whole ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
WX4400# display arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED