3Com Wireless LAN WX1200 - Manual (Page 567)

copy 567
WX4400# reset system force
...... rebooting ......
See Also
„
display config on page 574
„
reset system on page 582
copy Performs the following copy operations:
„
Copies a file from a TFTP server to nonvolatile storage.
„
Copies a file from nonvolatile storage or temporary storage to a TFTP
server.
„
Copies a file from one area in nonvolatile storage to another.
„
Copies a file to a new filename in nonvolatile storage.
Syntax — copy source-url destination-url
„
source-url — Name and location of the file to copy. The uniform
resource locator (URL) can be one of the following:
„
[subdirname/]filename
„
file:[subdirname/]filename
„
tftp://ip-addr/[subdirname/]filename
„
tmp:filename
For the filename, specify between 1 and 128 alphanumeric characters,
with no spaces. Enter the IP address in dotted decimal notation.
The subdirname/ option specifies a subdirectory.
„
destination-url — Name of the copy and the location where to
place the copy. The URL can be one of the following:
„
[subdirname/]filename
„
file:[subdirname/]filename
„
tftp://ip-addr/[subdirname/]filename
If you are copying a system image file into nonvolatile storage, the
filename must include the boot partition name. You can specify one
of the following:
„
boot0:/filename
„
boot1:/filename