Clear dot1x timeout auth-server, Clear dot1x timeout supplicant – 3Com Wireless LAN WX1200 User Manual
Page 504
504
C
HAPTER
17: 802.1X M
ANAGEMENT
C
OMMANDS
clear dot1x timeout
auth-server
Resets to the default setting the number of seconds that must elapse
before the WX times out a request to a RADIUS server.
Syntax —
clear dot1x timeout auth-server
Defaults — The default is 30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the default timeout for requests to an
authentication server, type the following command:
WX4400# clear dot1x timeout auth-server
success: change accepted.
See Also
set dot1x timeout auth-server on page 515
clear dot1x timeout
supplicant
Resets to the default setting the number of seconds that must elapse
before the WX switch times out an authentication session with a
supplicant (client).
Syntax —
clear dot1x timeout supplicant
Defaults — The default for the authentication timeout sessions is
30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the timeout period
for an authentication session:
WX4400# clear dot1x timeout supplicant
success: change accepted.
See Also