3Com Wireless LAN WX1200 - Manual (Page 106)

106 C HAPTER 5: VLAN C OMMANDS
display roaming
station Shows a list of the stations roaming to the wireless LAN switch through a
VLAN tunnel.
Syntax — display roaming station
[vlan vlan-id] [peer ip-addr ]
„
vlan vlan-id — Output is restricted to stations using this VLAN.
„
peer ip-addr — Output is restricted to stations tunnelling through
this peer WX switch in the Mobility Domain.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Old AP MAC field removed in
MSS Version 4.1.
Usage — The output displays roaming stations within the previous 1
second.
Examples — To display all stations roaming to the WX switch, type the
following command:
WX4400# display roaming station
User Name Station Address
VLAN State
----------------------- --------------- ----------------- -------------- ------
redsqa
10.10.10.5 violet Up
Table 22 describes the fields in the display.
Table 22 Output for display roaming station
Field Description
User Name Name of the user. This is the name used for authentication. The
name resides in a RADIUS server database or the local user
database on a wireless LAN switch.
Station
Address IP address of the user device.
VLAN Name of the VLAN to which the RADIUS server or WX switch
local user database assigned the user.