3Com Wireless LAN WX1200 - Manual (Page 279)

display network-domain 279
Table 48 describes the fields in the display.
See Also
„
clear network-domain on page 274
„
set network-domain mode member seed-ip on page 280
„
set network-domain mode seed domain-name on page 282
„
set network-domain peer on page 281
Table 48 Radio-Specific Parameters
Parameter Description
Output if WX is the Network Domain Seed
Network Domain name Name of the Network Domain for which the WX switch is a seed.
Peer IP addresses of the other seeds in the Network Domain.
State State of the connection between the WX switch and the
peer Network Domain seeds:
„
UP
„
DOWN
Member IP addresses of the seed WX switch and members in the
Network Domain.
State State of the WX switch in the Network Domain:
„
UP
„
DOWN
Mode Role of the WX switch in the Network Domain:
„
UP
„
DOWN
Output if WX is a Network Domain Member
Member Network
Domain name Name of the Network Domain of which the WX switch is a
member.
Member IP addresses of the seed WX switch and members in the
Network Domain.
State State of the WX switch in the Network Domain.
„
UP
„
DOWN
Mode Role of the WX switch in the Network Domain:
„
MEMBER
„
SEED