3Com Wireless LAN WX1200 - Manual (Page 550)

550 C HAPTER 19: RF D ETECTION C OMMANDS
See Also
„
display rfdetect data on page 544
„
display rfdetect visible on page 552
display rfdetect
ssid-list Displays the entries in the permitted SSID list.
Syntax — display rfdetect ssid-list
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Crypto-Types Encryption type:
clear (no encryption)
ccmp
tkip
wep104 (WPA 104-bit WEP)
wep40 (WPA 40-bit WEP)
wep (non-WPA WEP)
WX-IPaddress System IP address of the WX switch that detected the rogue.
Port/Radio/Channel Port number, radio number, and channel number of the radio
that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)
Mac MAC address of the radio that detected the rogue.
Device-type Device type detected by the MAP radio.
Adhoc Ad-hoc status (yes or no) detected by the MAP radio.
Crypto-Types Encryption type detected by the MAP radio.
RSSI Received signal strength indication (RSSI)—the strength of the
RF signal detected by the MAP radio, in decibels referred to
1 milliwatt (dBm).
SSID SSID mapped to the BSSID.
Table 100 display rfdetect mobility-domain ssid or bssid Output (continued)
Field Description