3Com Wireless LAN WX1200 - Manual (Page 451)

display security acl hits 451
Examples — To display a summary of the committed security ACLs on a
WX switch, type the following command:
WX4400# display security acl
ACL table
ACL
Type Class Mapping
---------------------------- ---- ------ -------
acl_123
IP Static Port 2 In
acl_133 IP Static Port 4 In
acl_124 IP Static
To view a summary of the security ACLs in the edit buffer, type the
following command:
WX4400# display security acl editbuffer
ACL edit-buffer table
ACL
Type Status
---------------------------- ---- --------------
acl_122
IP Not committed
acl_132 IP Not committed
acl-144 IP Not committed
See Also
„
clear security acl on page 446
„
display security acl info on page 452
„
set security acl on page 459
display security acl
hits Displays the number of packets filtered by security ACLs (“hits”) on the
WX switch. Each time a packet is filtered by a security ACL, the hit
counter increments.
Syntax — display security acl hits
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For MSS to count hits for a security ACL, you must specify hits
in the set security acl commands that define ACE rules for the ACL.