Set service-profile cipher-tkip – 3Com Wireless LAN WX1200 User Manual
Page 378

378
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Examples — The following command configures service profile sp2 to
use CCMP encryption:
WX4400# set service-profile sp2 cipher-ccmp enable
success: change accepted.
See Also
set service-profile cipher-tkip on page 378
set service-profile cipher-wep104 on page 379
set service-profile cipher-wep40 on page 380
set service-profile wpa-ie on page 391
set service-profile
cipher-tkip
Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in
a service profile.
Syntax —
set service-profile
name cipher-tkip {enable | disable}
name
— Service profile name.
enable
— Enables TKIP encryption for WPA clients.
disable
— Disables TKIP encryption for WPA clients.
Defaults — When the WPA IE is enabled, TKIP encryption is enabled by
default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use TKIP, you must also enable the WPA IE.
Examples — The following command disables TKIP encryption in service
profile sp2:
WX4400# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
set service-profile cipher-ccmp on page 377
set service-profile cipher-wep104 on page 379