3Com Wireless LAN WX1200 - Manual (Page 249)

set mac-user attr 249
set mac-user attr Assigns an authorization attribute in the local database on the WX switch
to a user who is authenticated by a MAC address.
(To assign authorization attributes through RADIUS, see the
documentation for your RADIUS server.)
Syntax — set mac-user mac-addr attr attribute-name value
„
mac-addr — MAC address of the user, in hexadecimal numbers
separated by colons (:). You can omit leading zeros.
„
attribute-name value — Name and value of an attribute you are
using to authorize the MAC user for a particular service or session
characteristic. For a list of authorization attributes and values that you
can assign to local users, see Table 44.
Table 44 Authentication Attributes for Local Users
Attribute Description Valid Value(s)
encryption-type Type of encryption
required for access by
the client. Clients who
attempt to use an
unauthorized encryption
method are rejected. One of the following numbers that
identifies an encryption algorithm:
„
1—AES_CCM (Advanced
Encryption Standard using Counter
with CBC-MAC)
„
2—Reserved
„
4—TKIP (Temporal Key Integrity
Protocol)
„
8—WEP_104 (the default)
(Wired-Equivalent Privacy protocol
using 104 bits of key strength)
„
16—WEP_40 (Wired-Equivalent
Privacy protocol using 40 bits of
key strength)
„
32—NONE (no encryption)
„
64—Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types. For example, to specify
WEP_104 and WEP_40, use 24.