3Com Wireless LAN WX1200 - Manual (Page 424)

424 C HAPTER 13: IGMP S NOOPING C OMMANDS
Table 75 Output for display igmp
Field Description
VLAN VLAN name. MSS displays information separately for each
VLAN.
IGMP is enabled
(disabled) IGMP state.
Proxy reporting Proxy reporting state.
Mrouter solicitation Multicast router solicitation state.
Querier functionality Pseudo-querier state.
Configuration values
(qi) Query interval.
Configuration values
(oqi) Other-querier-present interval.
Configuration values
(qri) Query response interval.
Configuration values
(lmqi) Last member query interval.
Configuration values
(rvalue) Robustness value.
Multicast router
information List of multicast routers and active multicast groups. The
fields containing this information are described separately.
The display igmp mrouter command shows the same
information.
Port Number of the physical port through which the WX can
reach the router.
Mrouter-IPaddr IP address of the multicast router interface.
Mrouter-MAC MAC address of the multicast router interface.
Type How the WX learned that the port is a multicast router
port:
„
conf — Static multicast port configured by an
administrator
„
madv — Multicast advertisement
„
quer — IGMP query
„
dvmrp — Distance Vector Multicast Routing Protocol
(DVMRP)
„
pimv1 — Protocol Independent Multicast (PIM)
version 1
„
pimv2 — PIM version 2