3Com Wireless LAN WX1200 - Manual (Page 527)

display sessions network 527
EXAMPLE\Singh 12* 10.10.10.30 vlan-eng 3/2
EXAMPLE\Havel 13* 10.10.10.40 vlan-eng 1/2
2 sessions match criteria (of 3 total)
(Table 91 on page 528 describes the summary displays of display
sessions network commands.)
The following command displays detailed (verbose) session information
about user [email protected]:
WX1200# display sessions network user [email protected] verbose
User
Sess IP or MAC VLAN Port/
Name ID Address Name Radio
----------------------------- ---- ----------------- --------------- -----
[email protected]
5* 10.20.30.40 vlan-eng 1/1
Client MAC: 00:02:2d:6e:ab:a5 GID: SESS-5-000430-686792-d8b3c564
State: ACTIVE (prev AUTHORIZED)
now on: WX 192.168.12.7, AP/radio 1/1, AP 00:0b:0e:00:05:fe, as of 00:23:32 ago
1 sessions match criteria (of 10 total)
The following command displays verbose output about the sessions of all
current network users:
WX1200# display sessions network verbose
User Sess IP or MAC VLAN Port/
Name ID Address Name
Radio
------------------------------ ---- ----------------- --------------- -----
SHUTTLE2\exmpl
6* 10.3.8.55 default 3/1
Client MAC: 00:06:25:13:08:33 GID: SESS-4-000404-98441-c807c14b
State: ACTIVE (prev AUTHORIZED)
now on: WX 10.3.8.103, AP/radio 3/1, AP 00:0b:0e:ff:00:3a, as of
00:00:24 ago
from: WX 10.3.8.103, AP/radio 6/1, AP 00:0b:0e:00:05:d7, as of
00:01:07 ago
from: WX 10.3.8.103, AP/radio 3/1, AP 00:0b:0e:ff:00:3a, as of
00:01:53 ago
Vlan-Name=default (service-profile)
Service-Type=2 (service-profile)
End-Date=52/06/07-08:57 (AAA)
Start-Date=05/04/11-10:00 (AAA)
1 sessions total