3Com Wireless LAN WX1200 - Manual (Page 139)

display dhcp-client 139
Examples — The following command displays DHCP client information:
WX1200# display dhcp-client
Interface: corpvlan(4)
Configuration Status: Enabled
DHCP State: IF_UP
Lease Allocation: 65535 seconds
Lease Remaining: 65532 seconds
IP Address: 10.3.1.110
Subnet Mask: 255.255.255.0
Default Gateway: 10.3.1.1
DHCP Server: 10.3.1.4
DNS Servers: 10.3.1.29
DNS Domain Name: mycorp.com
Table 30 describes the fields in this display.
See Also
„
set interface dhcp-client on page 161
Table 30 Output for display dhcp-client
Field Description
Interface VLAN name and number.
Configuration
Status Status of the DHCP client on this VLAN:
„
Enabled
„
Disabled
DHCP State State of the IP interface:
„
IF_UP
„
IF_DOWN
Lease Allocation Duration of the address lease.
Lease Remaining Number of seconds remaining before the address lease expires.
IP Address IP address received from the DHCP server
Subnet Mask Network mask of the IP address received from the DHCP server.
Default Gateway Default gateway IP address received from the DHCP server. If the
address is 0.0.0.0, the server did not provide an address.
DHCP Server IP address of the DHCP server.
DNS Servers DNS server IP address(es) received from the DHCP server.
DNS Domain
Name Default DNS domain name received from the DHCP server.