Display dhcp-client, Set arp on page 158, Set arp agingtime on page 159 – 3Com Wireless LAN WX1200 User Manual
Page 138

138
C
HAPTER
7: IP S
ERVICES
C
OMMANDS
Table 29 describes the fields in this display.
See Also
display dhcp-client
Displays DHCP client information for all VLANs.
Syntax —
display dhcp-client
Defaults — None.
Access — All.
History — Introduced in MSS Version 4.0.
Table 29 Output for display arp
Field
Description
ARP aging time
Number of seconds a dynamic entry can remain unused
before MSS removes the entry from the ARP table.
Host
IP address, hostname, or alias.
HW Address
MAC address mapped to the IP address, hostname, or alias.
VLAN
VLAN the entry is for.
Type
Entry type:
DYNAMIC — Entry was learned from network traffic and
ages out if unused for longer than the ARP aging
timeout.
LOCAL — Entry for the WX switch’s MAC address. Each
VLAN has one local entry for the WX switch’s MAC
address.
PERMANENT — Entry does not age out and remains in
the configuration even following a reboot.
STATIC — Entry does not age out but is removed after a
reboot.
State
Entry state:
RESOLVING — MSS sent an ARP request for the entry
and is waiting for the reply.
RESOLVED — Entry is resolved.