Boot prompt commands, Boot prompt commands by usage, Rompt – 3Com Wireless LAN WX1200 User Manual
Page 619: Ommands
24
B
OOT
P
ROMPT
C
OMMANDS
Boot prompt commands enable you to perform basic tasks, including
booting a system image file, from the boot prompt (boot>). A CLI session
enters the boot prompt if MSS does not boot successfully or you
intentionally interrupt the boot process. To interrupt the boot process,
press q followed by Enter (return).
CAUTION: Generally, boot prompt commands are used only for
troubleshooting. 3Com recommends that you use these commands only
when working with 3Com Technical Support to diagnose a system issue.
In particular, commands that change boot parameters can interfere with
a WX switch’s ability to boot successfully.
Boot Prompt
Commands by
Usage
This chapter presents boot prompt commands alphabetically. Use
Table 111 to locate commands in this chapter based on their use.
Table 111 Boot Prompt Commands by Usage
Type
Command
Command Information
Booting
File Management