Set spantree portvlanpri – 3Com Wireless LAN WX1200 User Manual
Page 418
418
C
HAPTER
12: STP C
OMMANDS
set spantree
portvlanpri
Changes the priority of a network port or ports for selection as part of
the path to the STP root bridge, on one VLAN or all VLANs.
Syntax —
set spantree portvlanpri
port-list priority value {all | vlan vlan-id}
port-list
— List of ports. MSS changes the priority on the specified
ports.
priority
value
— Priority value. You can specify a value from 0
(highest priority) through 255 (lowest priority).
all
— Changes the priority on all VLANs.
vlan
vlan-id
— VLAN name or number. MSS changes the priority on
only the specified VLAN.
Defaults — The default STP priority for all network ports is 128.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command sets the priority of ports 3 and 4 to
48 on VLAN mauve:
WX1200# set spantree portvlanpri 3-4 priority 48 vlan mauve
success: change accepted.
See Also
clear spantree portpri on page 395
clear spantree portvlanpri on page 396