3Com Wireless LAN WX1200 - Manual (Page 267)

display mobility-domain config 267
Usage — This command has no effect if the WX switch member is not
configured as part of a Mobility Domain or the current WX switch is not
the seed.
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
„
set mobility-domain member on page 269
display
mobility-domain
config Displays the configuration of the Mobility Domain.
Syntax — display mobility-domain config
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Domain
configuration:
WX4400# display mobility-domain config
This WX is a member, with seed 192.168.14.6
See Also
„
clear mobility-domain on page 266
„
set mobility-domain member on page 269
„
display mobility-domain status on page 267
display
mobility-domain
status On the seed WX, displays the Mobility Domain status and members.
Syntax — display mobility-domain status
Defaults — None.
Access — Enabled.