3Com Wireless LAN WX1200 - Manual (Page 63)

4
P
ORT
C
OMMANDS
Use port commands to configure and manage individual ports and
load-sharing port groups.
Commands by
Usage This chapter presents port commands alphabetically. Use Table 9 to
locate commands in this chapter based on their use.
Table 9 Port Commands by Usage
Type Command
Port Type set port type ap on page 91
set dap on page 81
set port type wired-auth on page 94
clear port type on page 68
clear dap on page 64
Name set port name on page 86
clear port name on page 66
State set port on page 83
reset port on page 81
display port status on page 73
Gigabit Interface Type display port media-type on page 75
set port media-type on page 85
clear port media-type on page 66
Speed set port speed on page 89
Autonegotiation set port negotiation on page 86
PoE set port poe on page 87
display port poe on page 71
SNMP set port trap on page 90