Radius and server group commands, Commands by usage, Radius – 3Com Wireless LAN WX1200 User Manual
Page 485: Erver, Roup, Ommands
16
RADIUS
AND
S
ERVER
G
ROUP
C
OMMANDS
Use RADIUS commands to set up communication between a WX switch
and groups of up to four RADIUS servers for remote authentication,
authorization, and accounting (AAA) of administrators and network
users.
Commands by
Usage
This chapter presents RADIUS commands alphabetically. Use Table 85 to
locate commands in this chapter based on their uses.
(For information about RADIUS attributes, see the RADIUS appendix in
the
Wireless LAN Switch and Controller Configuration Guide
.)
Table 85 RADIUS Commands by Usage
Type
Command
RADIUS Client
set radius client system-ip on page 491
clear radius client system-ip on page 487
RADIUS Servers set radius on page 490
clear radius server on page 489
Server Groups
set server group load-balance on
page 497
clear server group on page 489
RADIUS Proxy
set radius proxy client on page 492
set radius proxy port on page 493