3Com Wireless LAN WX1200 - Manual (Page 306)

306 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
The following command uses the terse option to display brief
information for Distributed MAPs:
WX4400# display dap status terse
Total number of entries: 4
Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto DAP, i = insecure
Port Flg IP Address Model MAC Address Radio1 Radio2 Uptime
------ --- ------------- ------ ----------------- ------ ------ ------------
3 ---
MP-372 D ?/? D ?/? 0d 0h 0m 0s
Dap 1 --- MP-372 D ?/? D ?/? 0d 0h 0m 0s
Dap 2 --- MP-372 D ?/? D ?/? 0d 0h 0m 0s
Dap100 oa- 10.8.255.11 MP-122 00:0b:0e:da:da:82 E 1/17 E36/11 0d 0h 0m17s
Table 56 and Table 57 describe the fields in this display.
Table 56 Output for display ap status
Field Description
DAP Connection ID for the Distributed MAP.
Note: This field is applicable only if the MAP is configured on
the WX switch as a Distributed MAP.
Port WX port number.
Note: This field is applicable only if the MAP is directly
connected to the WX switch and the WX switch’s port is
configured as a MAP access port.
IP-addr IP address of the MAP. The address is assigned to the MAP
by a DHCP server.
Note: This field is applicable only if the MAP is configured on
the WX switch as a Distributed MAP.
AP model MAP access point model number.
manufacturer Company that made the MAP access point.
fingerprint Hexadecimal fingerprint of the MAP’s public encryption key.
This field is displayed only for Distributed MAPs.
name MAP access point name.
Link Status of this link with the MAP access point and the MAP
port at the other end of the link. The status can be up or
down.