Help – 3Com Wireless LAN WX1200 User Manual
Page 46
46
C
HAPTER
3: S
YSTEM
S
ERVICE
C
OMMANDS
See Also
set system countrycode on page 56
set system idle-timeout on page 58
set system location on page 59
help
Displays a list of commands that can be used to configure and monitor
the WX switch.
Syntax —
help
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — Use this command to see a list of available commands. If
you have restricted access, you see fewer commands than if you have
enabled access. To show a list of CLI commands available at the enabled
access level, type the following command at the enabled access level:
WX4400# help
Commands:
-------------------------------------------------------------------------
clear
Clear, use 'clear help' for more information
commit
Commit the content of the ACL table
copy
Copy from filename (or url) to filename (or url)
Memory
Current size (in megabytes) of nonvolatile memory
(NVRAM) and synchronous dynamic RAM (SDRAM), plus
the percentage of total memory space in use, in the
following format:
NVRAM size /SDRAM size (percent of total)
Total Power Over
Ethernet
Total power that the device is currently supplying to its
directly connected MAP access points, in watts.
Table 7 display system output (continued)
Field
Description