3Com Wireless LAN WX1200 - Manual (Page 542)

542 C HAPTER 19: RF D ETECTION C OMMANDS
Table 97 describes the fields in this display.
See Also
„
set radio-profile countermeasures on page 355
display rfdetect
counters Displays statistics for rogue and Intrusion Detection System (IDS) activity
detected by the MAPs managed by a WX switch.
Syntax — display rfdetect counters
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.0.
Table 97 display rfdetect countermeasures Output
Field Description
Rogue MAC BSSID of the rogue.
Type Classification of the rogue device:
„
rogue—Wireless device that is on the network but is not
supposed to be on the network.
„
intfr—Wireless device that is not part of your network and
is not a rogue, but might be causing RF interference with
MAP radios.
„
known—Device that is a legitimate member of the
network.
Countermeasures
Radio MAC MAC address of the 3Com radio sending countermeasures
against the rogue.
WX-IPaddr System IP address of the WX switch that is managing the
MAP that is sending or will send countermeasures.
Port/Radio/Channel Port number, radio number, and channel number of the
countermeasures radio. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)