3Com Wireless LAN WX1200 - Manual (Page 149)

display ntp 149
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 38 describes the fields in this display.
See Also
„
clear ip telnet on page 131
„
display ip https on page 145
„
set ip https server on page 167
„
set ip telnet on page 171
„
set ip telnet server on page 172
display ntp Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table 38 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
„
Enabled
„
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.