3Com Wireless LAN WX1200 - Manual (Page 590)

590 C HAPTER 21: T RACE C OMMANDS
clear log trace Deletes the log messages stored in the trace buffer.
Syntax — clear log trace
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To delete the trace log, type the following command:
WX4400# clear log trace
See Also
„
display log buffer on page 610
„
set log on page 614
clear trace Deletes running trace commands and ends trace processes.
Syntax — clear trace {trace-area | all}
„
trace-area — Ends a particular trace process. Specify one of the
following keywords to end the traces documented in this chapter:
„
authorization — Ends an authorization trace
„
dot1x — Ends an 802.1X trace
„
authentication — Ends an authentication trace
„
sm — Ends a session manager trace
„
all — Ends all trace processes.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To clear all trace processes, type the following command:
WX4400# clear trace all
success: clear trace all