3Com Wireless LAN WX1200 - Manual (Page 500)

500 C HAPTER 17: 802.1X M ANAGEMENT C OMMANDS
clear dot1x
bonded-period Resets the Bonded Auth™ (bonded authentication) period to its default
value. The bonded period is the number of seconds MSS retains session
information for an authenticated machine while waiting for an 802.1X
client on the machine to start (re)authentication for the user. When
bonded authentication is enabled, it applies only to an 802.1X user
whose authentication rule on the WX switch contains the bonded
option.
Syntax — clear dot1x bonded-period
Defaults — The default bonded authentication period is 0 seconds,
which disables the feature.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the Bonded period to its default, type the
following command:
WX4400# clear dot1x bonded-period
success: change accepted.
Reauthentication, cont. clear dot1x reauth-max on page 503
set dot1x reauth-period on page 515
clear dot1x reauth-period on page 503
Retransmission set dot1x max-req on page 511
clear dot1x max-req on page 501
Quiet Period and Timeouts set dot1x quiet-period on page 513
clear dot1x quiet-period on page 502
set dot1x timeout auth-server on page 515
clear dot1x timeout auth-server on
page 504
set dot1x timeout supplicant on page 516
clear dot1x timeout supplicant on page 504
Settings, Active Clients, and
Statistics display dot1x on page 505
Table 86 802.1X Commands by Usage (continued)
Type Command