3Com Wireless LAN WX1200 - Manual (Page 403)

display spantree portvlancost 403
display spantree
portvlancost Shows the cost of a port on a path to the STP root bridge, for each of the
port’s VLANs.
Syntax — display spantree portvlancost port-list
„
port-list — List of ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
„
clear spantree portcost on page 394
„
clear spantree portvlancost on page 395
„
display spantree on page 398
„
set spantree portcost on page 414
„
set spantree portvlancost on page 417
display spantree
statistics Displays STP statistics for one or more WX network ports.
Syntax — display spantree statistics
[port-list [vlan vlan-id]]
„
port-list — List of ports. If you do not specify any ports, MSS
displays STP statistics for all ports.
„
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.