3Com Wireless LAN WX1200 - Manual (Page 130)

130 C HAPTER 7: IP S ERVICES C OMMANDS
See Also
„
clear ip dns domain on page 129
„
display ip dns on page 144
„
set ip dns on page 164
„
set ip dns domain on page 165
„
set ip dns server on page 166
clear ip route Removes a route from the IP route table.
Syntax — clear ip route {default | ip-addr mask |
ip-addr/mask-length} gateway
„
default — Default route.
default is an alias for IP address 0.0.0.0/0.
„
ip-addr mask — IP address and subnet mask for the route
destination, in dotted decimal notation (for example, 10.10.10.10
255.255.255.0).
„
ip-addr/mask-length — IP address and subnet mask length in CIDR
format (for example, 10.10.10.10/24).
„
gateway — IP address, DNS hostname, or alias of the next-hop router.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command removes the route to destination
10.10.10.68/24 through gateway router 10.10.10.1:
WX1200# clear ip route 10.10.10.68/24 10.10.10.1
success: change accepted.
See Also
„
display ip route on page 146
„
set ip route on page 167