Xerox 180 User Manual

Page 89

SYSTEM CONTROL TASKS

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

4-5

Step 6.

When the LPS is offline, press the System Power Off button on the
operator control panel (see figure 4-4).

Figure 4-4.

System Power Off button on operator control panel

When the LPS is in offline mode

To power off the LPS if you are running offline:

Step 1.

Press the key or check the status display on the
PC UI desktop, to ensure the system is idle.

Step 2.

Unload the tape or cartridge. (Refer to “Offline printing tasks” chapter
for instructions on unloading tapes and cartridges.)

Caution:

If a tape or cartridge is loaded when the LPS is

powered off, data on the tape or cartridge may be destroyed.

Step 3.

Press the System Power Off button on the operator control panel.
(Refer to figure 4-4.)