Xerox 180 - Manual (Page 118)

JOB CONTROL TASKS
5-4 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Job control tasks
The following sections contain instructions for performing specific job
control tasks.
Abort
Use this task to do one of the following:
•
Remove a specific print job from the system
•
Remove the print job currently being processed
• Cause the current print job to stop printing (printing continues
with the next report)
•
Cause the currently active nonprint task (such as FDL or PDL)
to abort (there must be no active print jobs when this command
is entered).
Abort task through windows Perform the following steps:
Step 1. Select “Abort” from the Job Control menu to open the Abort window
(see figure 5-2).
Figure 5-2. Abort window
Step 2. Select one of the following options:
• To cause the current job to stop printing, select the Output
button.
•
To remove the print job currently being input into the system,
select the Input button.
• To remove a specific print job from the system, enter the job
number in the Job Number field.
•
To abort a non print task (such as FDL or PDL), select the Non-
Print Task button.