Xerox 180 - Manual (Page 114)

SYSTEM CONTROL TASKS
4-30 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Remote Terminal
The remote terminal function is only available in conjunction with
Xerox Print Services Manager software. Please refer to the
Xerox
DocuPrint180 Installation Planning Guide for hardware requirements
for use of the remote terminal option.
Use this task to transfer control of the DocuPrint180 from the PC UI
to a remote device when running DocuPrintServer (formerly XPSM)
jobs.
Note: This selection will only appear if the required
DocuPrintServer (formerly XPSM) software options have been
loaded
Remote Terminal task through
windows
Select "Remote Terminal" from the System Control menu. A window
appears asking you for confirmation.
Figure 4-24. Remote terminal confirmation window
After remote terminal has been entered, the System Controller will no
longer recognize input from the PCUI and the message shown in
figure 4-25 will be displayed. To return control of the DocuPrint180 to
the PCUI, the command @UI$ must be entered at the remote
terminal.
Figure 4-25. Remote terminal display window
Exit to DOS
Use this task to exit the desktop before turning off the PC UI or to
return to the DOS command line.
Exit to DOS task through windows Select “Exit to DOS” from the System Control menu. A window
appears asking you for confirmation.
Select Yes to exit to DOS, or select No to cancel the exit request.
To return to the desktop, key in MANUI and press the key.