Xerox 180 User Manual

Page 262

Text mode
Original mode

MAINTENANCE TASKS

11-6

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

Step 5.

Place the removed cap over the opening on the end of the full waste
container (see figure 11-7).

Figure 11-7. Placing the cap on the waste container

Step 6.

Slide a new, empty, dry ink waste container into the printer until the
container stops (see figure 11-8).

Note:

Do not remove the cap from the new container.

Figure 11-8. Inserting the new dry ink waste container

Step 7.

Close the printer doors.

Note:

If any dry ink gets on your hands, wash them with soap

and cold water. Heat sets the ink permanently. If any dry ink
gets on your clothes, brush them with a dry paper towel or a stiff-
bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Dry cleaners should be
told that the spot is dry ink for a printer, so they will not use a
solvent that sets the stain.