Entering commands through the messages window – Xerox 180 User Manual
Page 58
USING THE PC UI
2-22
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Entering commands through the Messages window
Use the Messages window (see figure 2-16) if you want to perform a
task by entering commands rather than selecting options in a
window.
Figure 2-16. Messages window
Place the cursor in the Messages window and click once with the left
mouse button or the
enter the command at the cursor.
Key-in conventions
Follow these conventions when entering commands:
•
The system is ready to receive commands when this message
appears in the Messages window:
OS1000 READY FOR COMMANDS
•
All commands may be abbreviated to the first three characters
or spelled out fully and correctly.
•
Commands are executed by pressing
those entered with the function keys.
•
Spaces or commas may be used to separate command
parameters.
•
Error and information messages from the system are preceded
by OS and a four-digit code indicating the severity level. Refer
to the
Xerox DocuPrint 180 LPS Message Guide for information
on a particular error message.
•
A message acknowledging your request appears as positive
feedback to you. An error message appears when a command
is entered incorrectly:
OS2710 INVALID COMMAND, PLEASE REENTER