Xerox 180 - Manual (Page 305)

PROBLEM SOLVING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 12-25
Stacker bin problems
This section explains what to do when papers are being thrown
around the stacker, and when paper stack is falling over or sliding
around the bin.
Papers are being thrown around the stacker
This problem may occur when you have unloaded paper by opening
the top cover of the stacker bin.
Note: Never unload paper this way.
To remedy this situation, unload the bin following the normal
procedure. (Refer to the “Unloading a stacker bin” section of the
“Paper facts” chapter.)
Paper stack is falling over or sliding around the bin
This problem may be due to excessive paper curl. Try the following
remedies:
• Reduce the paper curl by following the instructions in the
“Paper curl and paper jams” section of this chapter.
•
Reduce the number of sheets going to the bin through the Bin
Limits task. (Refer to the “Status and print tasks” chapter for
instructions.)