Xerox 180 - Manual (Page 101)

SYSTEM CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 4-17
Set Date/Time task through
command line
Enter the following command:
SET TIME mm/dd/yy hh:mm:ss
You can separate the numbers in the date with a slash (/), a dash (—
), or a space. You can use the numbers from 1 to 12 for the months
or the following abbreviations: JAN, FEB, MAR, APR, MAY, JUN,
JUL, AUG, SEP, OCT, NOV, DEC.
You can separate the numbers in the time with a colon (:) or a space.
Entering the seconds is optional; the system assumes :00 if you do
not enter the seconds.
Because the command is designed to allow you to change either the
time, the date, or both, you do not enter commas for missing
elements when setting only one of them. To change only the time,
for example, enter:
SET TIME 10:27