Xerox 180 - Manual (Page 188)

HIP PRINTING TASKS
8-6 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
If the selected host is not online and responding, the following
message appears every 30 seconds until the host comes online or
the online request is terminated by the HIP OFFLINE command:
HP1240 HOST NOT RESPONDING
Take HIP offline
Use this task to take HIP offline. The LPS no longer accepts jobs
from the host.
Take HIP Offline task through windows Select the Offline header button from the HIP window.
Take HIP Offline task through
command line
Enter the following command:
HIP OFFLINE
The system’s response is delayed to the end of the current file if a file
is being transmitted. The following messages appear:
HP1200 OFFLINE PENDING END OF TRANSMISSION
HP1207 OFFLINE PENDING END OF CURRENT ACTIVE XPF
SESSION
HP1230 HOST OFFLINE
Start a HIP print job
Use this task to start or continue printing jobs from HIP’s internal job
queue.
Note: The host must be selected and HIP online before you use
this task.
Start Job task through windows To start or continue printing jobs, select one of the following:
• The Start header button to print the job normally.
•
The Dump header button to print the next job in the queue as a
formatted data dump for analysis.
To start a particular print job:
Step 1. Enter the job number in the JID# field.
Step 2. Select one of the following:
•
The Start header button
•
The Dump header button to submit the job as a formatted data
dump for analysis.
To start accepting nonprint files (fonts, forms, or other files), select
the Accept Non-Print Files box.
To start processing HIP jobs in concatenation mode, select the
Concatenate box.