Xerox 180 - Manual (Page 234)

STATUS AND PRINT TASKS
9-36 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Step 2. Select either of the following options:
• To select a configuration for the feeding or finishing device,
select the profile label from the Feeding Device or Finishing
Device field’s auxiliary menu. You can also enter the profile
label directly into the Feeding Device or Finishing Device field.
•
To display the current device configuration values, select the
“Show NVM Values” option from the window's header auxiliary
menu. The current device values appear in the window, along
with a description of each value.
Step 3. Select the appropriate header button:
•
Apply/Close. Send the selected configuration values to the
printer and close the window.
• Apply. Send the selected configuration values to the printer.
•
Close. Close the window.
Configuring task through command line
FCG (display the profile labels) Use this command to display the profile labels in the FCG.LIB file.
Logon Level Levels 2 through 5.
Syntax FCG
FCG (configure a finishing or feeding
device)
Use this command to load into printer memory the personality profile
the LPS must use to communicate with the finishing device or bulk
feeder. The personality profile is an entry in a text file called
“FCG.LIB.” Once this file is created, it is preserved across sysgens.
Logon Level Levels 2 through 5.
Syntax FCG { profile-label}
Parameters Table 9-11 shows the parameters used in FCG to configure a
finishing or feeding device.
Table 9-11. Parameters of the FCG (configure a finishing or
feeding device) command
Parameter Description
profile-label Specifies the entry in the FCG.LIB file to be sent to
the printer.