Select feeder trays – Xerox 180 User Manual

Page 206

STATUS AND PRINT TASKS

9-8

XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

Select feeder trays

Use this task to override stock selections in the print job and force
printing of a job using a specific tray, cluster, or a feeding device.

Select Feeder Trays task

through windows

Perform the following steps:

Step 1.

Select the Feed Mode header button from the Printer Status window
to open the Feed Mode window (see figure 9-4).

Figure 9-4.

Feed Mode window

Note:

Options 5, 6, and 7 only appear if the system is

configured with these parts.

Step 2.

Select one of the following options:

•

To use the clusters set up in the print job, select MAIN from the
Feed Mode window.

•

To feed paper from the Aux cluster, select AUX from the Feed
Mode window.

•

To feed paper from all trays, select AUTO from the Feed Mode
window.

•

To feed paper using a specific cluster, select Cluster... to open
the cluster window, then select an option from the displayed list.

•

To feed paper from a specific tray, select the tray number from
the Feed Mode window.

•

To feed paper from a bulk feeder, select 7 from the Feed Mode
window.

MAIN

AUX

AUTO

Cluster...